PxD6Drive

Defined in include/extensions/PxD6Joint.h

struct PxD6Drive

Used to specify which axes of a D6 joint are driven.

Each drive is an implicit force-limited damped spring:

force = spring * (target position - position) + damping * (targetVelocity - velocity)

Alternatively, the spring may be configured to generate a specified acceleration instead of a force.

A linear axis is affected by drive only if the corresponding drive flag is set. There are two possible models for angular drive: swing/twist, which may be used to drive one or more angular degrees of freedom, or slerp, which may only be used to drive all three angular degrees simultaneously. Please use PxD6AngularDriveConfig to configure the angular drive model.

See also

PxD6Joint PxD6AngularDriveConfig

Public Types

enum Enum

Values:

enumerator eX

drive along the X-axis

enumerator eY

drive along the Y-axis

enumerator eZ

drive along the Z-axis

enumerator eTWIST

rotational drive around the X-axis

Note

Only allowed if the angular drive configuration is set to PxD6AngularDriveConfig::eSWING_TWIST.

enumerator eSWING1

rotational drive around the Y-axis

Note

Only allowed if the angular drive configuration is set to PxD6AngularDriveConfig::eSWING_TWIST.

enumerator eSWING2

rotational drive around the Z-axis

Note

Only allowed if the angular drive configuration is set to PxD6AngularDriveConfig::eSWING_TWIST.

enumerator eSLERP

drive of all three angular degrees along a SLERP-path

Note

Only allowed if the angular drive configuration is set to PxD6AngularDriveConfig::eSLERP.

enumerator eCOUNT