PxController

Defined in include/characterkinematic/PxController.h

Inheritance Relationships

Derived Types

public PxBoxController (PxBoxController)
public PxCapsuleController (PxCapsuleController)

class PxController

Base class for character controllers.

See also

PxCapsuleController PxBoxController

Subclassed by PxBoxController, PxCapsuleController

Public Functions

virtual PxControllerShapeType::Enum getType() const = 0

Return the type of controller.

See also

PxControllerType

virtual void release() = 0: Releases the controller.

virtual PxControllerCollisionFlags move(const PxVec3 &disp, PxF32 minDist, PxF32 elapsedTime, const PxControllerFilters &filters, const PxObstacleContext *obstacles = NULL) = 0

Moves the character using a “collide-and-slide” algorithm.

Parameters

disp – [in] Displacement vector
minDist – [in] The minimum travelled distance to consider. If travelled distance is smaller, the character doesn’t move. This is used to stop the recursive motion algorithm when remaining distance to travel is small.
elapsedTime – [in] Time elapsed since last call
filters – [in] User-defined filters for this move
obstacles – [in] Potential additional obstacles the CCT should collide with.

Returns

Collision flags, collection of PxControllerCollisionFlags

virtual bool setPosition(const PxExtendedVec3 &position) = 0

Sets controller’s position.

The position controlled by this function is the center of the collision shape.

To move the character under normal conditions use the move() function.

Warning

This is a ‘teleport’ function, it doesn’t check for collisions.

Warning

The character’s position must be such that it does not overlap the static geometry.

Parameters: position – [in] The new (center) positon for the controller.
Returns: Currently always returns true.

virtual const PxExtendedVec3 &getPosition() const = 0

Retrieve the raw position of the controller.

The position retrieved by this function is the center of the collision shape. To retrieve the bottom position of the shape, a.k.a. the foot position, use the getFootPosition() function.

The position is updated by calls to move(). Calling this method without calling move() will return the last position or the initial position of the controller.

Returns: The controller’s center position

virtual bool setFootPosition(const PxExtendedVec3 &position) = 0

Set controller’s foot position.

The position controlled by this function is the bottom of the collision shape, a.k.a. the foot position.

To move the character under normal conditions use the move() function.

Note

The foot position takes the contact offset into account

Warning

This is a ‘teleport’ function, it doesn’t check for collisions.

Parameters: position – [in] The new (bottom) positon for the controller.
Returns: Currently always returns true.

virtual PxExtendedVec3 getFootPosition() const = 0

Retrieve the “foot” position of the controller, i.e.

the position of the bottom of the CCT’s shape.

Note

The foot position takes the contact offset into account

Returns: The controller’s foot position

virtual PxRigidDynamic *getActor() const = 0

Get the rigid body actor associated with this controller (see PhysX documentation).

The behavior upon manually altering this actor is undefined, you should primarily use it for reading const properties.

Returns: the actor associated with the controller.

virtual void setStepOffset(const PxF32 offset) = 0

The step height.

See also

PxControllerDesc.stepOffset

Parameters: offset – [in] The new step offset for the controller.

virtual PxF32 getStepOffset() const = 0

Retrieve the step height.

See also

setStepOffset()

Returns: The step offset for the controller.

virtual void setNonWalkableMode(PxControllerNonWalkableMode::Enum flag) = 0

Sets the non-walkable mode for the CCT.

See also

PxControllerNonWalkableMode

Parameters: flag – [in] The new value of the non-walkable mode.

virtual PxControllerNonWalkableMode::Enum getNonWalkableMode() const = 0

Retrieves the non-walkable mode for the CCT.

See also

PxControllerNonWalkableMode

Returns: The current non-walkable mode.

virtual PxF32 getContactOffset() const = 0

Retrieve the contact offset.

See also

PxControllerDesc.contactOffset

Returns: The contact offset for the controller.

virtual void setContactOffset(PxF32 offset) = 0

Sets the contact offset.

See also

PxControllerDesc.contactOffset

Parameters: offset – [in] The contact offset for the controller.

virtual PxVec3 getUpDirection() const = 0

Retrieve the ‘up’ direction.

See also

PxControllerDesc.upDirection

Returns: The up direction for the controller.

virtual void setUpDirection(const PxVec3 &up) = 0

Sets the ‘up’ direction.

See also

PxControllerDesc.upDirection

Parameters: up – [in] The up direction for the controller.

virtual PxF32 getSlopeLimit() const = 0

Retrieve the slope limit.

See also

PxControllerDesc.slopeLimit

Returns: The slope limit for the controller.

virtual void setSlopeLimit(PxF32 slopeLimit) = 0

Sets the slope limit.

See also

PxControllerDesc.slopeLimit

Note

This feature can not be enabled at runtime, i.e. if the slope limit is zero when creating the CCT (which disables the feature) then changing the slope limit at runtime will not have any effect, and the call will be ignored.

Parameters: slopeLimit – [in] The slope limit for the controller.

virtual void invalidateCache() = 0

Flushes internal geometry cache.

The character controller uses caching in order to speed up collision testing. The cache is automatically flushed when a change to static objects is detected in the scene. For example when a static shape is added, updated, or removed from the scene, the cache is automatically invalidated.

However there may be situations that cannot be automatically detected, and those require manual invalidation of the cache. Currently the user must call this when the filtering behavior changes (the PxControllerFilters parameter of the PxController::move call). While the controller in principle could detect a change in these parameters, it cannot detect a change in the behavior of the filtering function.

See also

PxController.move

virtual PxScene *getScene() = 0

Retrieve the scene associated with the controller.

Returns: The physics scene

virtual void *getUserData() const = 0

Returns the user data associated with this controller.

See also

PxControllerDesc.userData

Returns: The user pointer associated with the controller.

virtual void setUserData(void *userData) = 0

Sets the user data associated with this controller.

See also

PxControllerDesc.userData

Parameters: userData – [in] The user pointer associated with the controller.

virtual void getState(PxControllerState &state) const = 0

Returns information about the controller’s internal state.

See also

PxControllerState

Parameters: state – [out] The controller’s internal state

virtual void getStats(PxControllerStats &stats) const = 0

Returns the controller’s internal statistics.

See also

PxControllerStats

Parameters: stats – [out] The controller’s internal statistics

virtual void resize(PxReal height) = 0

Resizes the controller.

This function attempts to resize the controller to a given size, while making sure the bottom position of the controller remains constant. In other words the function modifies both the height and the (center) position of the controller. This is a helper function that can be used to implement a ‘crouch’ functionality for example.

Parameters: height – [in] Desired controller’s height

Protected Functions

inline PxController()

inline virtual ~PxController()