PxArticulationJointReducedCoordinate

Defined in include/PxArticulationJointReducedCoordinate.h

class PxArticulationJointReducedCoordinate : public PxBase 

A joint between two links in an articulation.

See also

PxArticulationReducedCoordinate, PxArticulationLink

Public Functions

virtual PxArticulationLink &getParentArticulationLink() const = 0

Gets the parent articulation link of this joint.

Returns: The parent link.

virtual void setParentPose(const PxTransform &pose) = 0

Sets the joint pose in the parent link actor frame.

See also

getParentPose

Note

This call is not allowed while the simulation is running.

Parameters: pose – [in] The joint pose. Default: The identity transform.

virtual PxTransform getParentPose() const = 0

Gets the joint pose in the parent link actor frame.

See also

setParentPose

Returns: The joint pose.

virtual PxArticulationLink &getChildArticulationLink() const = 0

Gets the child articulation link of this joint.

Returns: The child link.

virtual void setChildPose(const PxTransform &pose) = 0

Sets the joint pose in the child link actor frame.

See also

getChildPose

Note

This call is not allowed while the simulation is running.

Parameters: pose – [in] The joint pose. Default: The identity transform.

virtual PxTransform getChildPose() const = 0

Gets the joint pose in the child link actor frame.

See also

setChildPose

Returns: The joint pose.

virtual void setJointType(PxArticulationJointType::Enum jointType) = 0

Sets the joint type (e.g.

revolute).

Default: PxArticulationJointType::eUNDEFINED

See also

PxArticulationJointType, getJointType

Note

Setting the joint type is not allowed while the articulation is in a scene. In order to amend the joint type, remove and then re-add the articulation to the scene.

Parameters: jointType – [in] The joint type to set.

virtual PxArticulationJointType::Enum getJointType() const = 0

Gets the joint type.

See also

PxArticulationJointType, setJointType

Returns: The joint type.

virtual void setMotion(PxArticulationAxis::Enum axis, PxArticulationMotion::Enum motion) = 0

Sets the joint motion for a given axis.

Default: PxArticulationMotion::eLOCKED

See also

PxArticulationAxis, PxArticulationMotion, getMotion

Note

Setting the motion of joint axes is not allowed while the articulation is in a scene. In order to set the motion, remove and then re-add the articulation to the scene.

Parameters

axis – [in] The target axis.
motion – [in] The motion type to set.

virtual PxArticulationMotion::Enum getMotion(PxArticulationAxis::Enum axis) const = 0

Returns the joint motion for the given axis.

See also

PxArticulationAxis, PxArticulationMotion, setMotion

Parameters: axis – [in] The target axis.
Returns: The joint motion of the given axis.

virtual void setLimitParams(PxArticulationAxis::Enum axis, const PxArticulationLimit &limit) = 0

Sets the joint limits for a given axis.

The motion of the corresponding axis should be set to PxArticulationMotion::eLIMITED in order for the limits to be enforced.
The lower limit should be strictly smaller than the higher limit. If the limits should be equal, use PxArticulationMotion::eLOCKED and an appropriate offset in the parent/child joint frames.

Default: (0,0)

See also

getLimitParams, PxArticulationAxis, PxArticulationLimit

Note

This call is not allowed while the simulation is running.

Note

For PxArticulationJointType::eSPHERICAL, limit.min and limit.max must both be in range [-Pi, Pi].

Note

For PxArticulationJointType::eREVOLUTE, limit.min and limit.max must both be in range [-2*Pi, 2*Pi].

Note

For PxArticulationJointType::eREVOLUTE_UNWRAPPED, limit.min and limit.max must both be in range [-PX_MAX_REAL, PX_MAX_REAL].

Note

For PxArticulationJointType::ePRISMATIC, limit.min and limit.max must both be in range [-PX_MAX_REAL, PX_MAX_REAL].

Parameters

axis – [in] The target axis.
limit – [in] The joint limits.

virtual PxArticulationLimit getLimitParams(PxArticulationAxis::Enum axis) const = 0

Returns the joint limits for a given axis.

See also

setLimitParams, PxArticulationAxis, PxArticulationLimit

Parameters: axis – [in] The target axis.
Returns: The joint limits.

virtual void setDriveParams(PxArticulationAxis::Enum axis, const PxArticulationDrive &drive) = 0

Configures a joint drive for the given axis.

See PxArticulationDrive for parameter details; and the manual for further information, and the drives’ implicit spring-damper (i.e. PD control) implementation in particular.

Default: PxArticulationDrive(0.0f, 0.0f, 0.0f, PxArticulationDriveType::eNONE)

See also

getDriveParams, PxArticulationAxis, PxArticulationDrive

Note

This call is not allowed while the simulation is running.

Parameters

axis – [in] The target axis.
drive – [in] The drive parameters

virtual PxArticulationDrive getDriveParams(PxArticulationAxis::Enum axis) const = 0

Gets the joint drive configuration for the given axis.

See also

setDriveParams, PxArticulationAxis, PxArticulationDrive

Parameters: axis – [in] The target axis.
Returns: The drive parameters.

virtual void setDriveTarget(PxArticulationAxis::Enum axis, const PxReal target, bool autowake = true) = 0

Sets the joint drive position target for the given axis.

The target units are linear units (equivalent to scene units) for a translational axis, or rad for a rotational axis.

Default: 0.0

See also

PxArticulationAxis, getDriveTarget

Note

This call is not allowed while the simulation is running.

Note

For spherical joints, target must be in range [-Pi, Pi].

Note

The target is specified in the parent frame of the joint. If Gp, Gc are the parent and child actor poses in the world frame and Lp, Lc are the parent and child joint frames expressed in the parent and child actor frames then the joint will drive the parent and child links to poses that obey Gp * Lp * J = Gc * Lc. For joints restricted to angular motion, J has the form PxTranfsorm(PxVec3(PxZero), PxExp(PxVec3(twistTarget, swing1Target, swing2Target))). For joints restricted to linear motion, J has the form PxTransform(PxVec3(XTarget, YTarget, ZTarget), PxQuat(PxIdentity)).

Note

For spherical joints with more than 1 degree of freedom, the joint target angles taken together can collectively represent a rotation of greater than Pi around a vector. When this happens the rotation that matches the joint drive target is not the shortest path rotation. The joint pose J that is the outcome after driving to the target pose will always be the equivalent of the shortest path rotation.

Parameters

axis – [in] The target axis.
target – [in] The target position.
autowake – [in] If true and the articulation is in a scene, the call wakes up the articulation and increases the wake counter to PxSceneDesc::wakeCounterResetValue if the counter value is below the reset value.

virtual PxReal getDriveTarget(PxArticulationAxis::Enum axis) const = 0

Returns the joint drive position target for the given axis.

See also

PxArticulationAxis, setDriveTarget

Parameters: axis – [in] The target axis.
Returns: The target position.

virtual void setDriveVelocity(PxArticulationAxis::Enum axis, const PxReal targetVel, bool autowake = true) = 0

Sets the joint drive velocity target for the given axis.

The target units are linear units (equivalent to scene units) per second for a translational axis, or radians per second for a rotational axis.

Default: 0.0

See also

PxArticulationAxis, getDriveVelocity

Note

This call is not allowed while the simulation is running.

Parameters

axis – [in] The target axis.
targetVel – [in] The target velocity.
autowake – [in] If true and the articulation is in a scene, the call wakes up the articulation and increases the wake counter to PxSceneDesc::wakeCounterResetValue if the counter value is below the reset value.

virtual PxReal getDriveVelocity(PxArticulationAxis::Enum axis) const = 0

Returns the joint drive velocity target for the given axis.

See also

PxArticulationAxis, setDriveVelocity

Parameters: axis – [in] The target axis.
Returns: The target velocity.

virtual void setArmature(PxArticulationAxis::Enum axis, const PxReal armature) = 0

Sets the joint armature for the given axis.

The armature is directly added to the joint-space spatial inertia of the corresponding axis.
The armature is in mass units for a prismatic (i.e. linear) joint, and in mass units * (scene linear units)^2 for a rotational joint.

Default: 0.0

See also

PxArticulationAxis, getArmature

Note

This call is not allowed while the simulation is running.

Parameters

axis – [in] The target axis.
armature – [in] The joint axis armature.

virtual PxReal getArmature(PxArticulationAxis::Enum axis) const = 0

Gets the joint armature for the given axis.

See also

PxArticulationAxis, setArmature

Parameters: axis – [in] The target axis.
Returns: The armature set on the given axis.

virtual void setFrictionCoefficient(const PxReal coefficient) = 0

Sets the joint friction coefficient, which applies to all joint axes.

The joint friction is unitless and relates the magnitude of the spatial force [F_trans, T_trans] transmitted from parent to child link to the maximal friction force F_resist that may be applied by the solver to resist joint motion, per axis; i.e. |F_resist| <= coefficient * (|F_trans| + |T_trans|), where F_resist may refer to a linear force or torque depending on the joint axis.
The simulated friction effect is therefore similar to static and Coulomb friction. In order to simulate dynamic joint friction, use a joint drive with zero stiffness and zero velocity target, and an appropriately dimensioned damping parameter.

Default: 0.05

See also

getFrictionCoefficient

Note

This call is not allowed while the simulation is running.

Parameters: coefficient – [in] The joint friction coefficient.

virtual PxReal getFrictionCoefficient() const = 0

Gets the joint friction coefficient.

See also

setFrictionCoefficient

Returns: The joint friction coefficient.

virtual void setMaxJointVelocity(const PxReal maxJointV) = 0

Sets the maximal joint velocity enforced for all axes.

The solver will apply appropriate joint-space impulses in order to enforce the per-axis joint-velocity limit.
The velocity units are linear units (equivalent to scene units) per second for a translational axis, or radians per second for a rotational axis.

Default: 100.0

See also

getMaxJointVelocity

Note

This call is not allowed while the simulation is running.

Parameters: maxJointV – [in] The maximal per-axis joint velocity.

virtual PxReal getMaxJointVelocity() const = 0

Gets the maximal joint velocity enforced for all axes.

See also

setMaxJointVelocity

Returns: The maximal per-axis joint velocity.

virtual void setJointPosition(PxArticulationAxis::Enum axis, const PxReal jointPos) = 0

Sets the joint position for the given axis.

For performance, prefer PxArticulationCache::jointPosition to set joint positions in a batch articulation state update.
Use PxArticulationReducedCoordinate::updateKinematic after all state updates to the articulation via non-cache API such as this method, in order to update link states for the next simulation frame or querying.

Default: 0.0

See also

PxArticulationAxis, getJointPosition, PxArticulationCache::jointPosition, PxArticulationReducedCoordinate::updateKinematic

Note

This call is not allowed while the simulation is running.

Note

For PxArticulationJointType::eSPHERICAL, jointPos must be in range [-Pi, Pi].

Note

For PxArticulationJointType::eREVOLUTE, jointPos must be in range [-2*Pi, 2*Pi].

Note

For PxArticulationJointType::eREVOLUTE_UNWRAPPED, jointPos must be in range [-PX_MAX_REAL, PX_MAX_REAL].

Note

For PxArticulationJointType::ePRISMATIC, jointPos must be in range [-PX_MAX_REAL, PX_MAX_REAL].

Note

Joint position is specified in the parent frame of the joint. If Gp, Gc are the parent and child actor poses in the world frame and Lp, Lc are the parent and child joint frames expressed in the parent and child actor frames then the parent and child links will be given poses that obey Gp * Lp * J = Gc * Lc with J denoting the joint pose. For joints restricted to angular motion, J has the form PxTranfsorm(PxVec3(PxZero), PxExp(PxVec3(twistPos, swing1Pos, swing2Pos))). For joints restricted to linear motion, J has the form PxTransform(PxVec3(xPos, yPos, zPos), PxQuat(PxIdentity)).

Note

For spherical joints with more than 1 degree of freedom, the input joint positions taken together can collectively represent a rotation of greater than Pi around a vector. When this happens the rotation that matches the joint positions is not the shortest path rotation. The joint pose J that is the outcome of setting and applying the joint positions will always be the equivalent of the shortest path rotation.

Parameters

axis – [in] The target axis.
jointPos – [in] The joint position in linear units (equivalent to scene units) for a translational axis, or radians for a rotational axis.

virtual PxReal getJointPosition(PxArticulationAxis::Enum axis) const = 0

Gets the joint position for the given axis, i.e.

joint degree of freedom (DOF).

For performance, prefer PxArticulationCache::jointPosition to get joint positions in a batch query.

See also

PxArticulationAxis, setJointPosition, PxArticulationCache::jointPosition

Note

This call is not allowed while the simulation is running except in a split simulation during PxScene::collide() and up to PxScene::advance(), and in PxContactModifyCallback or in contact report callbacks.

Parameters: axis – [in] The target axis.
Returns: The joint position in linear units (equivalent to scene units) for a translational axis, or radians for a rotational axis.

virtual void setJointVelocity(PxArticulationAxis::Enum axis, const PxReal jointVel) = 0

Sets the joint velocity for the given axis.

For performance, prefer PxArticulationCache::jointVelocity to set joint velocities in a batch articulation state update.
Use PxArticulationReducedCoordinate::updateKinematic after all state updates to the articulation via non-cache API such as this method, in order to update link states for the next simulation frame or querying.

Default: 0.0

See also

PxArticulationAxis, getJointVelocity, PxArticulationCache::jointVelocity, PxArticulationReducedCoordinate::updateKinematic

Note

This call is not allowed while the simulation is running.

Parameters

axis – [in] The target axis.
jointVel – [in] The joint velocity in linear units (equivalent to scene units) per second for a translational axis, or radians per second for a rotational axis.

virtual PxReal getJointVelocity(PxArticulationAxis::Enum axis) const = 0

Gets the joint velocity for the given axis.

For performance, prefer PxArticulationCache::jointVelocity to get joint velocities in a batch query.

See also

PxArticulationAxis, setJointVelocity, PxArticulationCache::jointVelocity

Note

This call is not allowed while the simulation is running except in a split simulation during PxScene::collide() and up to PxScene::advance(), and in PxContactModifyCallback or in contact report callbacks.

Parameters: axis – [in] The target axis.
Returns: The joint velocity in linear units (equivalent to scene units) per second for a translational axis, or radians per second for a rotational axis.

inline virtual const char *getConcreteTypeName() const final override

Returns the string name of the dynamic type.

Returns: The string name.

inline virtual ~PxArticulationJointReducedCoordinate()

virtual void release() = 0: Releases the PxBase instance, please check documentation of release in derived class.

template<class T> inline T *is()

template<class T> inline const T *is() const

inline PxType getConcreteType() const

Returns concrete type of object.

See also

PxConcreteType

Returns: PxConcreteType::Enum of serialized object

inline void setBaseFlag(PxBaseFlag::Enum flag, bool value)

Set PxBaseFlag

Parameters

flag – [in] The flag to be set
value – [in] The flags new value

inline void setBaseFlags(PxBaseFlags inFlags)

Set PxBaseFlags

See also

PxBaseFlags

Parameters: inFlags – [in] The flags to be set

inline PxBaseFlags getBaseFlags() const

Returns PxBaseFlags.

See also

PxBaseFlags

Returns: PxBaseFlags

inline virtual bool isReleasable() const

Whether the object is subordinate.

A class is subordinate, if it can only be instantiated in the context of another class.

See also

PxSerialization::isSerializable

Returns: Whether the class is subordinate

Public Members

void *userData: The user can assign this to whatever, usually to create a 1:1 relationship with a user object.

Protected Functions

inline PxArticulationJointReducedCoordinate(PxType concreteType, PxBaseFlags baseFlags)

inline PxArticulationJointReducedCoordinate(PxBaseFlags baseFlags)

inline virtual bool isKindOf(const char *name) const: Returns whether a given type name matches with the type of this instance.

template<class T> inline bool typeMatch() const

Protected Attributes

PxType mConcreteType

PxBaseFlags mBaseFlags

PxU32 mBuiltInRefCount